Part Number Hot Search : 
MAX20 ZMM11LC1 DO1605T RC310 MLX902 MS06936 166BG GDZ20D
Product Description
Full Text Search
 

To Download TA78L005AP Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 1 toshiba bipolar linear integrat ed cir cuit silicon monolithic TA78L005AP, ta78l006ap, ta78l007ap, ta78l075ap, ta78l008ap, ta78l009ap, ta78l010ap, ta78l012ap, ta78l132ap, ta78l015ap, ta78l018ap, ta78l020ap, ta78l024ap three-terminal positive regulators 5 v, 6 v, 7 v, 7.5 v, 8 v, 9 v, 10 v, 12 v, 13.2 v, 15 v, 18 v, 20 v, 24 v features z suitable for ttl, c 2 mos power supply. z internal short-circuit current limiting. z internal thermal ov erload protection. z maximum output current of 150 ma (t j = 25c). z available in a plastic to-92mod package. pin assignment out 2 3 gnd in marking side 1 marking equivalent circuit weight: 0.36 g (typ.) ta78l ***ap lot no. (weekly code) a line indicates lead (pb)-free package or lead (pb)-free finish. part no. (or abbreviation code)
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 2 absolute maximum ratings (ta = 25c) characteristics symbol rating unit TA78L005AP ta78l006ap ta78l007ap ta78l075ap ta78l008ap ta78l009ap ta78l010ap ta78l012ap ta78l132ap ta78l015ap 35 ta78l018ap ta78l020ap input voltage ta78l024ap v in 40 v power dissipation (ta = 25c) p d 800 mw operating temperature t opr ? 30~85 c storage temperature t stg ? 55~150 c junction temperature t j 150 c thermal resistance r th (j-a) 156 c/w note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings and the operating ranges. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/derating concept and methods) and indi vidual reliability data (i.e. reliability test report and estimated failure rate, etc).
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 3 TA78L005AP electrical characteristics (unless otherwise specified, v in = 10 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 4.8 5.0 5.2 v 7.0 v ? v in ? 20 v ? 55 150 line regulation regline 1 t j = 25c 8.0 v ? v in ? 20 v ? 45 100 mv 1.0 ma ? i out ? 100 ma ? 11 60 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 5.0 30 mv 7.0 v ? v in ? 20 v, 1.0 ma ? i out ? 40 ma 4.75 ? 5.25 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 4.75 ? 5.25 v t j = 25c ? 3.1 6.0 quiescent current i b 1 t j = 125c ? ? 5.5 ma 8.0 v ? v in ? 20 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 40 ?  v rms long term stability ? v out /? t 1 ? ? 12 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 8.0 v ? v in ? 18 v, t j = 25c 41 49 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 0.6 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 4 ta78l006ap electrical characteristics (unless otherwise specified, v in = 11 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 5.76 6.0 6.24 v 8.1 v ? v in ? 21 v ? 50 150 line regulation regline 1 t j = 25c 9.0 v ? v in ? 21 v ? 45 110 mv 1.0 ma ? i out ? 100 ma ? 12 70 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 5.5 35 mv 8.1 v ? v in ? 21 v, 1.0 ma ? i out ? 40 ma 5.7 ? 6.3 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 5.7 ? 6.3 v t j = 25c ? 3.1 6.0 quiescent current i b 1 t j = 125c ? ? 5.5 ma 9.0 v ? v in ? 20 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 40 ?  v rms long term stability ? v out /? t 1 ? ? 14 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 9.0 v ? v in ? 19 v, t j = 25c 39 47 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 0.7 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 5 ta78l007ap electrical characteristics (unless otherwise specified, v in = 12 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 6.72 7.0 7.28 v 9.2 v ? v in ? 22 v ? 50 160 line regulation regline 1 t j = 25c 10 v ? v in ? 22 v ? 45 115 mv 1.0 ma ? i out ? 100 ma ? 13 75 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 6.0 40 mv 9.2 v ? v in ? 22 v, 1.0 ma ? i out ? 40 ma 6.65 ? 7.35 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 6.65 ? 7.35 v t j = 25c ? 3.1 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 10 v ? v in ? 22 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 50 ?  v rms long term stability ? v out /? t 1 ? ? 17 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 10 v ? v in ? 20 v, t j = 25c 37 46 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 0.75 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 6 ta78l075ap electrical characteristics (unless otherwise specified, v in = 13 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 7.21 7.5 7.79 v 9.8 v ? v in ? 23 v ? 40 170 line regulation regline 1 t j = 25c 10.5 v ? v in ? 23 v ? 40 120 mv 1.0 ma ? i out ? 100 ma ? 14 80 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 6.5 40 mv 9.8 v ? v in ? 23 v, 1.0 ma ? i out ? 40 ma 7.125 ? 7.875 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 7.125 ? 7.875 v t j = 25c ? 3.1 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 10.5 v ? v in ? 23 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 60 ?  v rms long term stability ? v out /? t 1 ? ? 19 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 11 v ? v in ? 21 v, t j = 25c 37 45 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 0.75 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 7 ta78l008ap electrical characteristics (unless otherwise specified, v in = 14 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 7.7 8.0 8.3 v 10.5 v ? v in ? 23 v ? 20 175 line regulation regline 1 t j = 25c 11 v ? v in ? 23 v ? 12 125 mv 1.0 ma ? i out ? 100 ma ? 15 80 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 7.0 40 mv 10.5 v ? v in ? 23 v, 1.0 ma ? i out ? 40 ma 7.6 ? 8.4 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 7.6 ? 8.4 v t j = 25c ? 3.1 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 11 v ? v in ? 23 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 60 ?  v rms long term stability ? v out /? t 1 ? ? 20 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 12 v ? v in ? 23 v, t j = 25c 37 45 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 0.8 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 8 ta78l009ap electrical characteristics (unless otherwise specified, v in = 15 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 8.64 9.0 9.36 v 11.4 v ? v in ? 24 v ? 80 200 line regulation regline 1 t j = 25c 12 v ? v in ? 24 v ? 20 160 mv 1.0 ma ? i out ? 100 ma ? 17 90 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 8.0 45 mv 11.4 v ? v in ? 24 v, 1.0 ma ? i out ? 40 ma 8.55 ? 9.45 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 8.55 ? 9.45 v t j = 25c ? 3.2 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 12 v ? v in ? 24 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 65 ?  v rms long term stability ? v out /? t 1 ? ? 21 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 12 v ? v in ? 24 v, t j = 25c 36 44 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 0.85 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 9 ta78l010ap electrical characteristics (unless otherwise specified, v in = 16 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 9.6 10 10.4 v 12.5 v ? v in ? 25 v ? 80 230 line regulation regline 1 t j = 25c 13 v ? v in ? 25 v ? 30 170 mv 1.0 ma ? i out ? 100 ma ? 18 90 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 8.5 45 mv 12.5 v ? v in ? 25 v, 1.0 ma ? i out ? 40 ma 9.5 ? 10.5 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 9.5 ? 10.5 v t j = 25c ? 3.2 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 13 v ? v in ? 25 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 70 ?  v rms long term stability ? v out /? t 1 ? ? 22 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 13 v ? v in ? 24 v, t j = 25c 36 43 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 0.9 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 10 ta78l012ap electrical characteristics (unless otherwise specified, v in = 19 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 11.5 12 12.5 v 14.5 v ? v in ? 27 v ? 120 250 line regulation regline 1 t j = 25c 16 v ? v in ? 27 v ? 100 200 mv 1.0 ma ? i out ? 100 ma ? 20 100 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 10 50 mv 14.5 v ? v in ? 27 v, 1.0 ma ? i out ? 40 ma 11.4 ? 12.6 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 11.4 ? 12.6 v t j = 25c ? 3.2 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 16 v ? v in ? 27 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 80 ?  v rms long term stability ? v out /? t 1 ? ? 24 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 15 v ? v in ? 25 v, t j = 25c 36 41 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 1.0 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 11 ta78l132ap electrical characteristics (unless otherwise specified, v in = 21 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 12.67 13.2 13.73 v 16 v ? v in ? 28 v ? 125 270 line regulation regline 1 t j = 25c 17 v ? v in ? 28 v ? 105 225 mv 1.0 ma ? i out ? 100 ma ? 22 120 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 11 60 mv 16 v ? v in ? 28 v, 1.0 ma ? i out ? 40 ma 12.54 ? 13.86 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 12.54 ? 13.86 v t j = 25c ? 3.2 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 17 v ? v in ? 28 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 90 ?  v rms long term stability ? v out /? t 1 ? ? 28 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 17 v ? v in ? 27 v, t j = 25c 34 41 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 1.2 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 12 ta78l015ap electrical characteristics (unless otherwise specified, v in = 23 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 14.4 15 15.6 v 17.5 v ? v in ? 30 v ? 130 300 line regulation regline 1 t j = 25c 20 v ? v in ? 30 v ? 110 250 mv 1.0 ma ? i out ? 100 ma ? 25 150 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 12 75 mv 17.5 v ? v in ? 30 v, 1.0 ma ? i out ? 40 ma 14.25 ? 15.75 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 14.25 ? 15.75 v t j = 25c ? 3.3 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 20 v ? v in ? 30 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 90 ?  v rms long term stability ? v out /? t 1 ? ? 30 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 18.5 v ? v in ? 28.5 v, t j = 25c 34 40 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 1.3 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 13 ta78l018ap electrical characteristics (unless otherwise specified, v in = 27 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 17.3 18 18.7 v 21.4 v ? v in ? 33 v ? 32 325 line regulation regline 1 t j = 25c 22 v ? v in ? 33 v ? 27 275 mv 1.0 ma ? i out ? 100 ma ? 30 170 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 15 75 mv 21.4 v ? v in ? 33 v, 1.0 ma ? i out ? 40 ma 17.1 ? 18.9 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 17.1 ? 18.9 v t j = 25c ? 3.3 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 22 v ? v in ? 33 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 150 ?  v rms long term stability ? v out /? t 1 ? ? 45 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 23 v ? v in ? 33 v, t j = 25c 32 38 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 1.5 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 14 ta78l020ap electrical characteristics (unless otherwise specified, v in = 29 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 19.2 20 20.8 v 23.5 v ? v in ? 35 v ? 33 330 line regulation regline 1 t j = 25c 24 v ? v in ? 35 v ? 28 285 mv 1.0 ma ? i out ? 100 ma ? 33 180 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 17 90 mv 23.5 v ? v in ? 35 v, 1.0 ma ? i out ? 40 ma 19.0 ? 21.0 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 19.0 ? 21.0 v t j = 25c ? 3.3 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 24 v ? v in ? 35 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 170 ?  v rms long term stability ? v out /? t 1 ? ? 49 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 25 v ? v in ? 35 v, t j = 25c 31 37 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 1.7 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 15 ta78l024ap electrical characteristics (unless otherwise specified, v in = 33 v, i out = 40 ma, c in = 0.33 f, c out = 0.1 f, 0c t j 125c) characteristics symbol test circuit test condition min typ. max unit output voltage v out 1 t j = 25c 23 24 25 v 27.5 v ? v in ? 38 v ? 35 350 line regulation regline 1 t j = 25c 28 v ? v in ? 38 v ? 30 300 mv 1.0 ma ? i out ? 100 ma ? 40 200 load regulation regload 1 t j = 25c 1.0 ma ? i out ? 40 ma ? 20 100 mv 27.5 v ? v in ? 38 v, 1.0 ma ? i out ? 40 ma 22.8 ? 25.2 output voltage v out 1 t j = 25c 1.0 ma ? i out ? 70 ma 22.8 ? 25.2 v t j = 25c ? 3.5 6.5 quiescent current i b 1 t j = 125c ? ? 6.0 ma 28 v ? v in ? 38 v ? ? 1.5 quiescent current change ? i b 1 t j = 25c 1.0 ma ? i out ? 40 ma ? ? 0.1 ma output noise voltage v no 2 ta = 25c, 10 hz ? f ? 100 khz ? 200 ?  v rms long term stability ? v out /? t 1 ? ? 56 ? mv/kh ripple rejection r.r. 3 f = 120 hz, 29 v ? v in ? 39 v, t j = 25c 31 35 ? db dropout voltage v d 1 t j = 25c, i out = 150 ma ? 1.7 ? v average temperature coefficient of output voltage t cvo 1 i out = 5 ma ? 2.0 ? mv/c
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 16 test circuit 1/standard application test circuit 2 v no test circuit 3 r.r.
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 17
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 18
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 19 precautions for use destruction of the ic may occur if high voltage in excess of the ic output volt age (typ. value) is applied to the ic output terminal. in this case, connect a zener diode between the output terminal and gnd to prevent any application of excessive voltage. in pa rticular, in a current boosting circuit such as that shown in application circuit example (2), if the input volt age is suddenly applied by stages and furthermore, load is light, excessive voltage may be applied transiently to the output terminal of the ic. in such a case, it may become necessary to increase the capacity of the output capa citor as appropriate, use a smaller r 1 (a resistor for bypassing ic bias current) or gradually raise the in put voltage in addition to using a zener diode as mentioned above. application circuits (1) standard application (2) a. current boost voltage regulator b. short-circuit protection (3) current regulator
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 20 (4) voltage boost regulator (5) negative regulator (6) positive and negative regulator
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 21 package dimensions
ta78l005,006,007,075,008,009,10, 12,132,15,18,20,24ap 2006-11-02 22 restrictions on product use 20070701-en ? the information contained herein is subject to change without notice. ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshib a products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconduct or devices,? or ?toshiba semiconductor reliability handbook? etc. ? the toshiba products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuri ng equipment, industrial robotics, domestic appliances, etc.).these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. unintended usage of toshiba products listed in his document shall be made at the customer?s own risk. ? the products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringement s of patents or other rights of the third parties which may result from its use. no license is granted by implic ation or otherwise under any patents or other rights of toshiba or the third parties. ? please contact your sales representative for product- by-product details in this document regarding rohs compatibility. please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.


▲Up To Search▲   

 
Price & Availability of TA78L005AP

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X